Customize the system setup
From the System setup tab, select Options to change settings as required. The following table describes the system settings.
General settings | Description |
|---|---|
Titration opacity | Adjust the opacity of the titration window by moving the slider. You can adjust the titration window to view the PSG software. |
Set titration window on top | Set the titration window to appear on top of all other windows. |
Pressure increment | Set the increment of the numeric control settings to 1.0 or 0.2 increments. |
Pressure units in | Set the pressure units to hPa or cmH2O. |
Flow units | Set the flow units to L/min or L/sec. |
Tidal volume units | Set the tidal volume units to L or ml. |
Temperature units | Set the temperature units to Fahrenheit (F) or Celsius (C). |
Leak alert | If turned on, you can set a value for the leak alert threshold. |
Graph and Report settings | Description |
|---|---|
Enable live graphs | Toggle this setting On or Off to enable or disable live graphs. |
Administrator settings | Description |
|---|---|
DC Outputs | Toggle this setting On or Off to display or hide access to DC Outputs. |
Administrator tab | Toggle this setting On or Off to display or hide access to the Administrator tab. |
