Connecting the AirCurve 11 VPAP Tx device and oximeter
Before connecting the AirCurve 11 VPAP Tx device to the oximeter, ensure the oximeter is powered on and in pairing mode. Refer to the manufacturer’s guide for more information.
On the AirCurve 11 VPAP Tx device, go to the MORE menu and tap Oximeter.
Tap SEARCH to locate the oximeter.
If the oximeter is found, a list will appear on screen. Locate the matching oximeter by scrolling through the list.
Tap the oximeter model and then tap CONNECT to pair the oximeter and device.
If the connection fails, check the following:
Connection failed. Tap OK and try the search again.
Device not supported. Check the oximeter model. Only the Nonin WristOx2® Model 3150 with BLE is validated with the AirCurve 11 VPAP Tx device.
For further issues with the oximeter or finger sensor, refer to the manufacturer's guide for assistance.
Disconnecting the oximeter
From the MORE menu, tap Oximeter.
Tap DISCONNECT.
Tap YES to confirm disconnect request.