Skip to main content

Sleep Lab Help

Disassembling

image34.png
image35.png
image36.png
image37.png
image38.png
image39.png

  1. Hold the humidifier tub at the top and bottom, press it gently and pull it away from the device.

    Note

    take care when handling the humidifier tub as the humidifier tub may be hot. Allow 10 minutes for the heater plate and any excess water to cool.

  2. Open the humidifier tub and discard any remaining water.

  3. Pinch the cuff of the air tubing, and gently pull it away from the device.

  4. Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.

  5. Locate the outlet connector on the inside of the device and release it by pressing the clip firmly.

  6. Remove the outlet connector by pulling it out through the outlet connector socket at the rear of the device.