Starting/stopping therapy
WARNING
The machine is not intended to be operated by persons (including children) with reduced physical, sensory or mental capabilities without adequate supervision by a person responsible for the patient’s safety.
Direct the patient to fit their mask.
Direct the patient to press the Start therapy/ Standby button or if the SmartStart feature is enabled, direct them to breathe into their mask.
|
|
| |||
Therapy will begin and the treatment screen is displayed. A dynamic pulse wave will appear during therapy. To review the patient's sleep progress, swipe up and down the screen. | |||||
Notes
The screen will fade and then go black automatically after a short period of time. Tap the screen to turn it back on.
If power is interrupted during therapy, the device will automatically restart therapy when power is restored.
The device has a light sensor that adjusts the screen brightness based on the light in the room.
Direct the patient to remove the mask.
Direct the patient to press the Start therapy/ Standby button or if SmartStop is enabled, therapy will stop automatically after a few seconds.