Troubleshooting
If you experience any problems, try the following suggestions. If you are not able to fix the problem, contact your supplier or ResMed.
Problem | Solution |
|---|---|
TxLink 2 error LED is illuminated | Disconnect the TxLink 2 and return to a ResMed service center for investigation. |
TxLink 2 power LED is not illuminated | Check the power supply and make sure the plug is fully inserted. If the problem persists, disconnect the TxLink 2 and return to a ResMed service center for investigation. |
For more details, refer to the Titration Equipment Installation Guide in ResMed.com/downloads/titrationsolutions.