More + menu
Parameter | Description | Range |
|---|---|---|
Warmup | Enable/disable the Warmup feature. If enabled, the device will commence a warm-up sequence to start the humidification system prior to commencing therapy. | On/Off |
Mask Fit | Run Mask Fit to try out and test the mask with air blowing through the device. See Mask Fit section for more details |
Parameter | Description | Range |
|---|---|---|
Oximeter | Commence Bluetooth connection to Oximeter. See Oximeter section for more details |
Parameter | Description | Range |
|---|---|---|
Airplane Mode | Enable/disable Airplane Mode. If enabled, the device will prevent Bluetooth and cellular connectivity if available | On/Off |
Acoustic Signal | Enable/disable Acoustic Signal. If enabled, the device will collect data to determine the acoustic signal of the mask connected. | On/Off |
Device Diagnostics | Enable/disable Device Diagnositcs. If enabled, the device will run a routine check on the blower. | Off/Daily/Weekly/2 weeks |
Humidifier | Appears if the Humidifier is connected. | |
ClimateLine | Appears if a ClimateLine tube is connected. | |
About | See information about device details including software configuration, network ID |
Before the patient is set up, ensure the correct time zone has been set. The time zone cannot be changed once patient data has been stored on the device. The patient data will need to be erased before changing the time zone.
The AirCurve 11 VPAP Tx device is set up with GMT (Greenwich Mean Time) time zone settings.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Time Zone.
Select the relevant GMT setting and tap OK.
When using the device in a multi-patient environment, the device settings should be reset between patient use.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Restore Defaults.
Tap OK to confirm or CANCEL to return to the previous screen.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Erase data.
Tap OK to confirm or CANCEL to return to the previous screen.
Parameter | Description | Range |
|---|---|---|
Warmup | Enable/disable the Warmup feature. If enabled, the device will commence a warm-up sequence to start the humidification system prior to commencing therapy. | On/Off |
Mask Fit | Run Mask Fit to try out and test the mask with air blowing through the device. See Mask Fit section for more details |
Parameter | Description | Range |
|---|---|---|
Oximeter | Commence Bluetooth connection to Oximeter. See Oximeter section for more details |
Parameter | Description | Range |
|---|---|---|
Airplane Mode | Enable/disable Airplane Mode. If enabled, the device will prevent Bluetooth and cellular connectivity if available | On/Off |
Acoustic Signal | Enable/disable Acoustic Signal. If enabled, the device will collect data to determine the acoustic signal of the mask connected. | On/Off |
Device Diagnostics | Enable/disable Device Diagnositcs. If enabled, the device will run a routine check on the blower. | Off/Daily/Weekly/2 weeks |
Humidifier | Appears if the Humidifier is connected. | |
ClimateLine | Appears if a ClimateLine tube is connected. | |
About | See information about device details including software configuration, network ID |
Before the patient is set up, ensure the correct time zone has been set. The time zone cannot be changed once patient data has been stored on the device. The patient data will need to be erased before changing the time zone.
The AirCurve 11 VPAP Tx device is set up with GMT (Greenwich Mean Time) time zone settings.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Time Zone.
Select the relevant GMT setting and tap OK.
When using the device in a multi-patient environment, the device settings should be reset between patient use.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Restore Defaults.
Tap OK to confirm or CANCEL to return to the previous screen.
From the Clinical Home screen, tap SETTINGS.
Move down the menu to find CONFIGURATION options.
Tap Erase data.
Tap OK to confirm or CANCEL to return to the previous screen.