Configuration
TxLink 2 is initially configured as follows:
IP Address: acquired automatically by DHCP
LEDs: During therapy, PAP device and Ethernet are disabled, and Power is dimmed
Analog DC Output Configuration as shown in the table below:
DC output | Parameter | Value | Voltage range |
|---|---|---|---|
A | Mask pressure | 0 to 30 cm H2O | 0 to 1 VDC |
B | Patient Flow | -120 to 120 L/min | -1 to 1 VDC |
C | Leak | 0 to 60 L/min | 0 to 1 VDC |
D | Inspiration Set Pressure | 0 to 30 cm H2O | 0 to 1 VDC |
E | Expiration Set Pressure | 0 to 30 cm H2O | 0 to 1 VDC |
F | Minute ventilation | 0 to 30 L/min | 0 to 1 VDC |