Skip to main content

Sleep Lab Help

Additional features

There are some other features on the device which the clinician can personalize.

Note

Not all functions are available in all regions. Functions vary based on therapy mode.

Menu

Function

Description

MY OPTIONS

Ramp Time

Period during which the pressure increases from a low start pressure to the prescribed treatment pressure.

Ramp Time can be set to Off or 5 to 45 minutes (in 5-minute increments).

Pressure Relief[a]

When EPR (Expiratory Pressure Relief) is enabled, the patient may find it easier to breathe out. This setting can help the patient get used to therapy.

Mask

Select the type of mask used with the device.

Tube

Select the type of tubing used with the device.

SmartStart™[a]

When SmartStart is enabled, therapy starts automatically when the patient breathes into the mask.

SmartStop[a]

When SmartStop is enabled, therapy stops automatically after a few seconds when the patient removes their mask.

MORE

Warmup

This function will heat the water in the humidifier tub

Mask Fit

This function assesses and identifies possible air leaks around the mask.

image26.png Indicates good mask seal. Leak is less than 24L/min.

image27.png Adjust the mask. Leak is more than 24L/min.

Device Diagnostic

When enabled, Device Diagnostics will analyze the functionality of the device. See ResMed.com for further details.

Device Diagnostic can be set to run Daily, Weekly, every 2 weeks, or it can be switched off.

[a] Feature must be enabled by the care provider before the patient can use.